Kyocera FS-3640
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
200000
Скорость печати
A4
40
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Размещение |
настольный |
Макс. формат |
A4 |
Факс |
|
Копир |
|
Тип устройства |
МФУ |
Сканер |
|
Печать фотографий |
|
Телефон |
|
Число страниц в месяц |
200 000 |
Область применения |
большой офис |
Цветность печати |
|
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Принтер |
|
Прямая печать |
|
Двусторонняя печать |
|
Печать без полей |
|
Пигментные чернила |
|
Система непрерывной подачи чернил |
|
Время разогрева |
22 |
Макс, разрешение для ч/б печати |
|
| По Y | 1 200 |
| По X | 1 200 |
Скорость ч/б печати |
|
| A4 | 40 |
Время выхода первого отпечатка |
|
| Ч/б | 11,5 |
Копир |
|
Шаг масштабирования |
0,01 |
Макс, количество копий за цикл |
999 |
Время выхода первой копии |
7 |
Значение масштаба |
|
| Минимальное | 0,25 |
| Максимальное | 4 |
Макс, разрешение (ч/б) |
|
| По X | 600 |
| По Y | 600 |
Сканер |
|
Макс. формат оригинала |
A4 |
Слайд-адаптер |
|
Стандарт TWAIN |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Устройство автоподачи оригиналов |
двустороннее |
Тип сканера |
планшетный/протяжный |
Емкость устройства автоподачи оригиналов |
50 |
Оттенки серого |
256 |
Макс, размер сканирования |
|
| По X | 216 |
| По Y | 297 |
Разрешение сканера |
|
| По Х | 600 |
Скорость сканирования |
|
| Цветн, | 25 |
| Ч/б | 35 |
Расходные материалы |
|
Количество картриджей |
1 |
Ресурс ч/б картриджа/тонера |
15 000 |
Печать на: |
|
| CD/DVD |
|
| Рулоне |
|
| Фотобумаге |
|
| Конвертах |
|
| Матовой бумаге |
|
| Пленках |
|
| Этикетках |
|
| Глянцевой бумаге |
|
| Карточках |
|
Плотность бумаги |
|
| Минимальная | 60 |
| Максимальная | 220 |
Факс |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
Память |
256 |
Цветной |
|
PC Fax |
|
Телефон |
|
Caller ID |
|
Спикерфон |
|
Стандарт DECT |
|
Автоответчик |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
| PostScript |
|
| PostScript 3 |
|
| PCL 6 |
|
| PCL 5c |
|
|
|
|
| PPDS |
|
| PCL 5e |
|
| PostScript 2 |
|
Количество установленных шрифтов |
|
| PostScript | 101 |
| PCL | 93 |
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Максимальная | 2 100 |
| Стандартная | 600 |
Вывод бумаги |
|
| Стандартный | 500 |
| Максимальный | 500 |
Финишер |
|
Сортировка со сдвигом |
|
Брошюровщик |
|
Степлер |
|
Электронная сортировка |
|
Сортер |
|
Интерфейсы |
|
Ethernet (RJ-45) |
|
Веб-интерфейс |
|
USB |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
Wi-Fi 802.11n |
|
Инфракрасный порт |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
AirPrint |
|
LPT |
|
Bluetooth |
|
Версия USB |
2,0 |
Память/Процессор |
|
Процессор |
PowerPC 464 |
Объем памяти |
1 024 |
Частота процессора |
800 |
Макс, объем памяти |
2 048 |
Дополнительная информация |
|
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
| DOS |
|
| Windows |
|
| Linux |
|
| Mac OS |
|
Потребляемая мощность |
|
| В режиме ожидания | 92,8 |
| При работе | 641,7 |
Уровень шума |
|
| В режиме ожидания | 32 |
| При работе | 55 |
Габариты |
|
Ширина |
494 |
Высота |
566 |
Вес |
26,7 |
Глубина |
497 |
Модули
Fuser Section 2
Paper Feed Section 4
Paper Feed Section 1
Fuser Section 1
(Электронные компоненты)
Image Formation Section
ACCESSORIES
COVERS
Exit Section
Document Processor 1
DRIVE SECTION
PAPER CASSETTE
Document Processor 2
Operation Section
FRAMES 2
DEVELOPING SECTION
PAPER FEED SECTION 2
Paper Feed Section 3
SCANNER SECTION
ELECTRICAL COMPONENTS
FRAMES 1
Детали FRAMES 1
| Деталь: | PULLEY SWITCH BACK |
| Парткод: | 302F926060 |
| Деталь: | ACTUATOR DU |
| Парткод: | 302F925180 |
| Деталь: | SPRING ACTUATOR DU |
| Парткод: | 302F925371 |
| Деталь: | LEVER FUSER RELEASE |
| Парткод: | 302J025200 |
| Деталь: | SPRING FUSER RELEASE |
| Парткод: | 302F925750 |
| Деталь: | SPRING LOCK |
| Парткод: | 302F925560 |
| Деталь: | LOCK FUSER |
| Парткод: | 302F925550 |
| Деталь: | INNER RAIL R |
| Парткод: | 302F925440 |
| Деталь: | SHAFT FEED DU |
| Парткод: | 302F929060 |
| Деталь: | INNER RAIL L |
| Парткод: | 302F925450 |
| Деталь: | SPRING DU |
| Парткод: | 302F925780 |
| Деталь: | ROLLER FACE UP |
| Парткод: | 302F925300 |
| Деталь: | BUSH FD |
| Парткод: | 302FV02470 |
| Деталь: | BUSH DU |
| Парткод: | 302F929140 |
| Деталь: | GEAR EXIT Z21 |
| Парткод: | 302F925141 |
| Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
| Парткод: | 2FM04150 |
| Деталь: | PULLEY FACE UP |
| Парткод: | 302F925160 |
| Деталь: | SPRING FACE UP |
| Парткод: | 302F925350 |
| Деталь: | LABEL PUSH |
| Парткод: | 302MC34040 |
| Деталь: | PARTS COVER REAR B ASSY SP |
| Парткод: | 302MC94090 |
| Деталь: | STOPPER 3 /2BT1107 A4 |
| Парткод: | 5MVX111DN007 |
| Деталь: | SPRING EARTH DU |
| Парткод: | 302J029020 |
| Деталь: | ROLLER DU |
| Парткод: | 302F929030 |
| Деталь: | ACTUATOR PE |
| Парткод: | 302F929041 |
| Цена: | 230 ₽ |
| Деталь: | SPRING PULLEY FEED |
| Парткод: | 302F929070 |
| Деталь: | SPRING PE RELEASE |
| Парткод: | 302F929080 |
| Деталь: | BUSH FUSER |
| Парткод: | 302HS25220 |
| Деталь: | PULLEY DU LOW |
| Парткод: | 302F929260 |
| Деталь: | BUSH PE |
| Парткод: | 302F929191 |
| Деталь: | SPRING DU LIFT |
| Парткод: | 302F929170 |
| Деталь: | BUSH DU |
| Парткод: | 302F929140 |
| Деталь: | LEVER LIFT DU L |
| Парткод: | 302F929151 |
| Деталь: | LEVER LIFT DU R |
| Парткод: | 302F929160 |
| Деталь: | DU ASSY SP |
| Парткод: | 302J094010 |
| Цена: | 7 800 ₽ |
| Деталь: | FRAME MPF |
| Парткод: | 302MC08010 |
| Деталь: | SP PULLEY FEED |
| Парткод: | 302F908380 |
| Деталь: | SHAFT FEED DU |
| Парткод: | 302F929060 |
| Деталь: | PULLEY FEED DU |
| Парткод: | 302F929050 |
| Деталь: | BUSH SP PULLEY /40283V0099 A4 |
| Парткод: | 5MVX111DN002 |
| Деталь: | SP PULLEY TURN |
| Парткод: | 302F908150 |
| Деталь: | GEAR MPF Z30 |
| Парткод: | 302F908130 |
| Деталь: | ROLLER M/P ASSY /43487B0027 A4 |
| Парткод: | 5AAVR0LL+051 |
| Цена: | 800 ₽ |
| Деталь: | SP ACTUATOR MPF |
| Парткод: | 302F908280 |
| Деталь: | ACTUATOR MPF A |
| Парткод: | 302F908120 |
| Деталь: | ACTUATOR MPF B |
| Парткод: | 302F908210 |
| Деталь: | SPRING LEVER LOCK R |
| Парткод: | 302F908330 |
| Деталь: | SPRING LEVER LOCK L |
| Парткод: | 302J008050 |
| Деталь: | SPRING EARTH CONNECTOR |
| Парткод: | 302F908230 |
| Деталь: | SEPARATOR MP ASSY |
| Парткод: | 302F994070 |
| Цена: | 1 000 ₽ |
| Деталь: | SPRING BOTTOM MPF R |
| Парткод: | 302F908100 |
| Деталь: | SP BOTTOM MPF L |
| Парткод: | 302F908270 |
| Деталь: | SP SEPARATOR MPF |
| Парткод: | 302F908290 |
| Деталь: | SPRING LOCK MPF |
| Парткод: | 302F908300 |
| Деталь: | BASE MPF |
| Парткод: | 302MC08020 |
| Деталь: | CURSOR MPF L |
| Парткод: | 302MC08030 |
| Деталь: | CURSOR MPF R |
| Парткод: | 302MC08040 |
| Деталь: | PARTS COVER MPF ASSY SP |
| Парткод: | 302LW94090 |
| Деталь: | PARTS BASE MPF SP |
| Парткод: | 302MC94030 |
| Деталь: | FK-350(U) |
| Парткод: | 302J193061 |
| Деталь: | FK-350(E) |
| Парткод: | 302J193051 |
| Деталь: | Formatter, exchange, HP Color LaserJet 3000dn and 3000dtn Series only (256 MB) |
| Парткод: | 302MD94034 |
| Деталь: | MC-320 |
| Парткод: | 302J093092 |
| Деталь: | WASTE BOTTLE ASSY |
| Парткод: | 302F994091 |
| Деталь: | DK-320 |
| Парткод: | 302J393033 |
| Деталь: | LABEL OPERATION R(GER) (3in1 model) |
| Парткод: | 302MC05140 |
| Деталь: | LABEL OPERATION R(FRA) (3in1 model) |
| Парткод: | 302MC05160 |
| Деталь: | LABEL OPERATION R(ITA) (3in1 model) |
| Парткод: | 302MC05180 |
| Деталь: | LABEL OPERATION R(SPA) (3in1 model) |
| Парткод: | 302MC05200 |
| Деталь: | LABEL OPERATION R(POR) (3in1 model) |
| Парткод: | 302MC05240 |
| Деталь: | LABEL OPERATION R(DUT) (3in1 model) |
| Парткод: | 302MC05260 |
| Деталь: | LABEL OPERATION R(RUS) (3in1 model) |
| Парткод: | 302MC05280 |
| Деталь: | LABEL OPERATION L(GER) (3in1 model) |
| Парткод: | 302MC05130 |
| Деталь: | LABEL OPERATION L(FRA) (3in1 model) |
| Парткод: | 302MC05150 |
| Деталь: | LABEL OPERATION L(ITA) (3in1 model) |
| Парткод: | 302MC05170 |
| Деталь: | LABEL OPERATION L(SPA) (3in1 model) |
| Парткод: | 302MC05190 |
| Деталь: | LABEL OPERATION L(POR) (3in1 model) |
| Парткод: | 302MC05230 |
| Деталь: | LABEL OPERATION L(DUT) (3in1 model) |
| Парткод: | 302MC05250 |
| Деталь: | LABEL OPERATION L(RUS) (3in1 model) |
| Парткод: | 302MC05270 |
| Деталь: | LABEL OPERATION R(GER) (4in1 model) |
| Парткод: | 302MC05140 |
| Деталь: | LABEL OPERATION R(FRA) (4in1 model) |
| Парткод: | 302MC05160 |
| Деталь: | LABEL OPERATION R(ITA) (4in1 model) |
| Парткод: | 302MC05180 |
| Деталь: | LABEL OPERATION R(SPA) (4in1 model) |
| Парткод: | 302MC05200 |
| Деталь: | LABEL OPERATION R(POR) (4in1 model) |
| Парткод: | 302MC05240 |
| Деталь: | LABEL OPERATION R(DUT) (4in1 model) |
| Парткод: | 302MC05260 |
| Деталь: | LABEL OPERATION R(RUS) (4in1 model) |
| Парткод: | 302MC05280 |
| Деталь: | LABEL OPERATION L(GER) (4in1 model) |
| Парткод: | 302MD05050 |
| Деталь: | LABEL OPERATION L(FRA) (4in1 model) |
| Парткод: | 302MD05060 |
| Деталь: | LABEL OPERATION L(ITA) (4in1 model) |
| Парткод: | 302MD05070 |
| Деталь: | LABEL OPERATION L(SPA) (4in1 model) |
| Парткод: | 302MD05080 |
| Деталь: | LABEL OPERATION L(POR) (4in1 model) |
| Парткод: | 302MD05090 |
| Деталь: | LABEL OPERATION L(DUT) (4in1 model) |
| Парткод: | 302MD05100 |
| Деталь: | LABEL OPERATION L(RUS) (4in1 model) |
| Парткод: | 302MD05110 |
| Деталь: | MODULAR CORD (4in1 model) |
| Парткод: | 303HZ45010 |
| Деталь: | MODULAR CORD AUSTRALIA (4in1 model) |
| Парткод: | 3063527482 |
| Деталь: | PARTS COVER RIGHT ASSY SP |
| Парткод: | 302MC94040 |
| Деталь: | PARTS COVER TOP ASSY |
| Парткод: | 302LW94170 |
| Деталь: | COVER DIMM |
| Парткод: | 302MC04020 |
| Деталь: | PARTS COVER LEFT ASSY SP |
| Парткод: | 302MC94050 |
| Деталь: | PARTS LID TOP A ASSY SP |
| Парткод: | 302LW94110 |
| Деталь: | PARTS COVER FRONT ASSY SP |
| Парткод: | 302MC94060 |
| Деталь: | PARTS COVER FRONT B ASSY SP |
| Парткод: | 302LW94140 |
| Деталь: | COVER REAR A |
| Парткод: | 302MC04070 |
| Деталь: | LID TOP C |
| Парткод: | 302MC04080 |
| Деталь: | COVER INNER R B |
| Парткод: | 302MC04100 |
| Деталь: | LID TOP B |
| Парткод: | 302LW04030 |
| Деталь: | PARTS COVER SIDE ASSY SP |
| Парткод: | 302MC94080 |
| Деталь: | COVER INNER L |
| Парткод: | 302MC04050 |
| Деталь: | PARTS COVER INNER R ASSY SP |
| Парткод: | 302MC94070 |
| Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
| Парткод: | 2FM04150 |
| Деталь: | SENSOR OPT. |
| Парткод: | 7NXTLP1255++H01 |
| Деталь: | SPRING EARTH A |
| Парткод: | 302J028020 |
| Деталь: | BUSH FD |
| Парткод: | 302FV02470 |
| Деталь: | ACTUATOR OVERFLOW |
| Парткод: | 302F928100 |
| Деталь: | SPRING COVER FD L |
| Парткод: | 302F928130 |
| Деталь: | SPRING COVER FD R |
| Парткод: | 302F928140 |
| Деталь: | MOTOR EJECT |
| Парткод: | 302F944131 |
| Цена: | 4 400 ₽ |
| Деталь: | SPRING PULLEY |
| Парткод: | 302F928170 |
| Деталь: | BUSH DU |
| Парткод: | 302F929140 |
| Деталь: | SPRING DISCHARGER |
| Парткод: | 302F928231 |
| Деталь: | SPRING PULLEY 35 |
| Парткод: | 302F928310 |
| Деталь: | PULLEY FEED DU |
| Парткод: | 302F929050 |
| Деталь: | SHAFT FEED DU |
| Парткод: | 302F929060 |
| Деталь: | COVER FD |
| Парткод: | 302MC28010 |
| Деталь: | LABEL OPERATION ENVELOPE |
| Парткод: | 302MC34030 |
| Деталь: | PARTS FD UNIT SP |
| Парткод: | 302MC94010 |
| Деталь: | PULLEY CONVEYING |
| Парткод: | 303JX29160 |
| Деталь: | BUSH SCREW |
| Парткод: | 302H702590 |
| Деталь: | SPRING REGIST |
| Парткод: | 303LJ24230 |
| Деталь: | LEVER RELEASE |
| Парткод: | 303LJ02150 |
| Деталь: | SPRING CONVEYING |
| Парткод: | 303LJ24121 |
| Деталь: | SPRING GND A |
| Парткод: | 303LJ02240 |
| Деталь: | PULLEY EJECT |
| Парткод: | 3HK10030 |
| Деталь: | JOINT PF ROLLER |
| Парткод: | 302LW07060 |
| Деталь: | GEAR Z32S |
| Парткод: | 303LJ31060 |
| Деталь: | SPRING EXIT |
| Парткод: | 303LJ24150 |
| Деталь: | LEVER PRESSURE |
| Парткод: | 303LJ29060 |
| Деталь: | SENSOR OPT. |
| Парткод: | 7NXSG2481+++H01 |
| Деталь: | ACTUATOR BASE |
| Парткод: | 303K502200 |
| Деталь: | STOPPER ORIGINAL |
| Парткод: | 303M602070 |
| Деталь: | FRICTION PLATE LF |
| Парткод: | 3HK07240 |
| Деталь: | PARTS DRIVER PWB ASSY SP |
| Парткод: | 303LJ94010 |
| Деталь: | SPRING LOOP PRESSURE |
| Парткод: | 303LJ29040 |
| Деталь: | CLUTCH PAPER FEED |
| Парткод: | 303LJ44040 |
| Цена: | 4 500 ₽ |
| Деталь: | ACTUATOR TIMING |
| Парткод: | 303LJ24080 |
| Деталь: | SPRING TIMING |
| Парткод: | 303LJ24090 |
| Деталь: | PULLEY LOOP |
| Парткод: | 3HL10140 |
| Деталь: | HOOK PF COVER |
| Парткод: | 303LJ24190 |
| Деталь: | SHAFT C PULLEY |
| Парткод: | 3H608150 |
| Деталь: | SPRING LF |
| Парткод: | 3HK07140 |
| Деталь: | GEAR Z28S |
| Парткод: | 303LJ31050 |
| Деталь: | GEAR Z56S |
| Парткод: | 303LJ31090 |
| Деталь: | SPRING GND B |
| Парткод: | 303LJ02250 |
| Деталь: | PARTS ROLLER EXIT SP |
| Парткод: | 303LJ94040 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | GUIDE SEPARATION |
| Парткод: | 303LJ24101 |
| Деталь: | GEAR Z35S |
| Парткод: | 303LJ31080 |
| Деталь: | PARTS ROLLER A CONVEYING SP |
| Парткод: | 303LJ94020 |
| Деталь: | PARTS ROLLER B CONVEYING SP |
| Парткод: | 303LJ94030 |
| Деталь: | GEAR T Z28S |
| Парткод: | 303LJ31100 |
| Деталь: | PARTS GEAR Z46S ONEWAY SP |
| Парткод: | 303LJ94050 |
| Деталь: | MK-370/MAINTENANCE KIT (OPTION) |
| Парткод: | 1702LX0UN0 |
| Деталь: | PLATE GND |
| Парткод: | 303HL22200 |
| Деталь: | COLLAR S SPRING |
| Парткод: | 3HK07080 |
| Деталь: | COLLAR PF |
| Парткод: | 3HK07270 |
| Деталь: | BASE DP |
| Парткод: | 302MC07010 |
| Деталь: | BUSH DRUM |
| Парткод: | 302F831060 |
| Деталь: | GEAR Z95H Z28H |
| Парткод: | 302F931110 |
| Деталь: | GEAR FEED Z34H |
| Парткод: | 302F931500 |
| Деталь: | CLUTCH DUPLEX |
| Парткод: | 302F944040 |
| Деталь: | MOTOR MAIN Z16 |
| Парткод: | 302J031020 |
| Деталь: | MOTOR DRUM Z16 |
| Парткод: | 302J031030 |
| Деталь: | GEAR Z77H |
| Парткод: | 302F931020 |
| Цена: | 210 ₽ |
| Деталь: | GEAR Z90H Z30H |
| Парткод: | 302F931040 |
| Деталь: | GEAR Z70H |
| Парткод: | 302F931030 |
| Деталь: | GEAR Z191H |
| Парткод: | 302F931590 |
| Деталь: | SPRING FUSER |
| Парткод: | 302F931270 |
| Деталь: | GEAR DLP Z32H |
| Парткод: | 302F931200 |
| Деталь: | GEAR DLP Z24H |
| Парткод: | 302F931290 |
| Деталь: | GEAR DLP JOINT Z25H |
| Парткод: | 302F931300 |
| Деталь: | GEAR DLP Z25H |
| Парткод: | 302F931310 |
| Деталь: | GEAR Z48H |
| Парткод: | 302F931050 |
| Деталь: | GEAR Z46H |
| Парткод: | 302F931060 |
| Деталь: | GEAR Z45S |
| Парткод: | 302F931610 |
| Деталь: | GEAR Z37S |
| Парткод: | 302F931070 |
| Деталь: | GEAR Z30S |
| Парткод: | 302F931090 |
| Деталь: | P.W.BOARD ASSY CONNECT-R |
| Парткод: | 302J101050 |
| Деталь: | BUSH FEED DRIVE |
| Парткод: | 302F931490 |
| Деталь: | GEAR Z34S |
| Парткод: | 302F931100 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | JOINT SHAFT CASSETTE |
| Парткод: | 302F931350 |
| Деталь: | SPRING MPF CAM |
| Парткод: | 302F931381 |
| Деталь: | SPRING FEED |
| Парткод: | 302F931450 |
| Деталь: | SOLENOID MPF |
| Парткод: | 302F944060 |
| Деталь: | CLUTCH MID FEED |
| Парткод: | 302F944200 |
| Деталь: | CLUTCH CASSETTE |
| Парткод: | 302F944210 |
| Деталь: | CLUTCH REGIST |
| Парткод: | 302F944220 |
| Деталь: | FEED DRIVE ASSY SP |
| Парткод: | 302F994031 |
| Цена: | 10 800 ₽ |
| Деталь: | HOLDER RETARD |
| Парткод: | 302F909180 |
| Деталь: | GUIDE RETARD |
| Парткод: | 302F909191 |
| Деталь: | LEVER BASE CAS REAR |
| Парткод: | 302F909031 |
| Деталь: | SPRING BASE CAS REAR |
| Парткод: | 302F909040 |
| Деталь: | SPRING RETARD |
| Парткод: | 302F909200 |
| Деталь: | PAD BOTTOM |
| Парткод: | 302F909210 |
| Деталь: | COVER LIFT GEAR |
| Парткод: | 302MC09030 |
| Деталь: | CURSOR END |
| Парткод: | 302MC09060 |
| Деталь: | LEVER END CURSOR |
| Парткод: | 302F909090 |
| Деталь: | SPRING SIZE FIX |
| Парткод: | 302F909250 |
| Деталь: | SPRING END /3070P319 A4 |
| Парткод: | 5MMW151SD003 |
| Деталь: | SPRING LOCK GUIDE /FS-1200 A4 |
| Парткод: | 5MMW166LD010 |
| Деталь: | GEAR LIFT Z64 |
| Парткод: | 302F909131 |
| Цена: | 240 ₽ |
| Деталь: | GEAR JOINT Z16 |
| Парткод: | 302F909140 |
| Деталь: | LEVER INDICATOR |
| Парткод: | 302F909151 |
| Деталь: | BUSH LIFT 6 |
| Парткод: | 302F909160 |
| Деталь: | RETARD ROLLER ASSY |
| Парткод: | 302F909171 |
| Цена: | 900 ₽ |
| Деталь: | LEVER SIDE CURSOR |
| Парткод: | 302F909070 |
| Деталь: | COVER CASSETTE TOP |
| Парткод: | 302MC09050 |
| Деталь: | LABEL DIAL A6 |
| Парткод: | 302MC09070 |
| Деталь: | LABEL A6 |
| Парткод: | 302MC09080 |
| Деталь: | BASE CASSETTE |
| Парткод: | 302MC09010 |
| Деталь: | BASE CASSETTE REAR |
| Парткод: | 302MC09020 |
| Деталь: | LID CASSETTE |
| Парткод: | 302MC09040 |
| Деталь: | CT-360 |
| Парткод: | 302MC93020 |
| Деталь: | ACTUATOR PUSH |
| Парткод: | 303LJ02080 |
| Деталь: | SPRING RELEASE |
| Парткод: | 303LJ02060 |
| Деталь: | LEVER SEPARATE |
| Парткод: | 303LJ24041 |
| Деталь: | SPRING,LF SHIFT GUIDE |
| Парткод: | 3HL10090 |
| Деталь: | LEVER LOOP |
| Парткод: | 303LJ24050 |
| Деталь: | PARTS SOLENOID PRESSURE PULLEY SP |
| Парткод: | 303LJ94140 |
| Деталь: | PARTS COVER PF ASSY SP |
| Парткод: | 302MC94100 |
| Деталь: | SPRING LOOP |
| Парткод: | 303HL10200 |
| Деталь: | PARTS SOLENOID FEED SHIFT SP |
| Парткод: | 303LJ94150 |
| Деталь: | GEAR Z66S Z70S |
| Парткод: | 303LJ31040 |
| Деталь: | GEAR Z40S Z61S |
| Парткод: | 303LJ31020 |
| Деталь: | GEAR Z46S Z79S |
| Парткод: | 303LJ31030 |
| Деталь: | PARTS MOTOR DP SP |
| Парткод: | 303LJ94061 |
| Деталь: | PARTS PLATE ORIGINAL SP |
| Парткод: | 303LJ94070 |
| Деталь: | SENSOR OPT. |
| Парткод: | 7NXSG2481+++H01 |
| Деталь: | HINGE R |
| Парткод: | 303LJ02040 |
| Цена: | 700 ₽ |
| Деталь: | HINGE L |
| Парткод: | 303LJ02030 |
| Цена: | 4 900 ₽ |
| Деталь: | GUIDE READING |
| Парткод: | 303LJ02020 |
| Деталь: | SPRING READING |
| Парткод: | 303LJ02070 |
| Деталь: | SPRING PUSH DU |
| Парткод: | 303LJ07070 |
| Деталь: | LEVER PUSH DU |
| Парткод: | 303LJ07060 |
| Деталь: | ACTUATOR ORIGINAL |
| Парткод: | 303LJ07050 |
| Деталь: | COVER FRONT |
| Парткод: | 302MC07020 |
| Деталь: | COVER REAR |
| Парткод: | 302MC07030 |
| Деталь: | PARTS TABLE ASSY SP |
| Парткод: | 303LJ94120 |
| Цена: | 4 700 ₽ |
| Деталь: | PARTS PWB PANEL MAIN ASSY SP |
| Парткод: | 302MC94150 |
| Деталь: | COVER CARD READER |
| Парткод: | 302MC05090 |
| Деталь: | COVER CARD READER C |
| Парткод: | 302MC05300 |
| Деталь: | LABEL OPERATION R |
| Парткод: | 302MC05220 |
| Деталь: | PANEL OPERATION L (3in1 model) |
| Парткод: | 302MC05020 |
| Деталь: | PANEL OPERATION L (4in1 model) |
| Парткод: | 302MD05010 |
| Деталь: | PARTS OPERATION UNIT SP (3in1 model) |
| Парткод: | 302MC94020 |
| Деталь: | PARTS OPERATION UNIT SP (4in1 model) |
| Парткод: | 302MD94010 |
| Деталь: | FAN L 80 |
| Парткод: | 302F944150 |
| Деталь: | PUSH SWITCH 03 SN /SW-192 N |
| Парткод: | 5FSP03090001+01 |
| Деталь: | PARTS PWB ASSY RELAY SP |
| Парткод: | 302LW94200 |
| Деталь: | SPRING EARTH FAN |
| Парткод: | 302F902410 |
| Деталь: | PULLEY RAIL DOUBLE |
| Парткод: | 302F925480 |
| Деталь: | PARTS SWITCHING REGULATOR (U) SP |
| Парткод: | 302LW94040 |
| Деталь: | PARTS SWITCHING REGULATOR (E) SP |
| Парткод: | 302LW94050 |
| Деталь: | FAN POWER PWB 50 |
| Парткод: | 302F944160 |
| Цена: | 4 600 ₽ |
| Деталь: | PARTS PWB ASSY CONNECT-L SP |
| Парткод: | 302LW94190 |
| Деталь: | AC CORD ASSY US |
| Парткод: | 7AAACCUS+10H001 |
| Деталь: | AC CORD ASSY |
| Парткод: | 302FV45020 |
| Деталь: | AC CORD ASSY |
| Парткод: | 302FV45040 |
| Деталь: | DV-352(U) B |
| Парткод: | 302LW93020 |
| Деталь: | DV-350(E) B |
| Парткод: | 302LW93010 |
| Деталь: | DV-354(AO) B |
| Парткод: | 302LW93030 |
| Деталь: | DC BRUSH ASSY |
| Парткод: | 302F994110 |
| Цена: | 950 ₽ |
| Деталь: | REGIST KIT |
| Парткод: | 302F994120 |
| Деталь: | SPRING TC CHARGE |
| Парткод: | 302F924120 |
| Деталь: | SPRING SEP CHARGE |
| Парткод: | 302J024020 |
| Деталь: | SPRING EARTH |
| Парткод: | 302F924140 |
| Деталь: | FAN ENGINE PWB 35 |
| Парткод: | 302J044030 |
| Деталь: | PARTS PWB ENGINE ASSY SP |
| Парткод: | 302MC94140 |
| Деталь: | GUIDE PAPER CHUTE |
| Парткод: | 302F924071 |
| Деталь: | ROLLER TRNSFER ASSY SP |
| Парткод: | 302F994300 |
| Цена: | 3 900 ₽ |
| Деталь: | SP RELEASE TC L |
| Парткод: | 302F924520 |
| Деталь: | BUSH FEED DRIVE |
| Парткод: | 302F931490 |
| Деталь: | LEVER RELEASE DLP L |
| Парткод: | 302F924480 |
| Деталь: | SPRING MAIN CHARGE |
| Парткод: | 302F924280 |
| Деталь: | SPRING BIAS CHARGE |
| Парткод: | 302F924340 |
| Деталь: | ACTUATOR REGIST |
| Парткод: | 302F924150 |
| Цена: | 130 ₽ |
| Деталь: | SPRING REGIST SENSOR |
| Парткод: | 302F924270 |
| Деталь: | ACTUATOR DU |
| Парткод: | 302F924220 |
| Деталь: | LEVER EMPTY |
| Парткод: | 302F924090 |
| Деталь: | PULLEY GUIDE |
| Парткод: | 302F924760 |
| Деталь: | SPRING RELEASE FUSER R |
| Парткод: | 302F924380 |
| Деталь: | LEVER RELEASE FUSER R |
| Парткод: | 302F924240 |
| Деталь: | SPRING RELEASE DLP R |
| Парткод: | 302F924320 |
| Деталь: | LEVER RELEASE DLP R |
| Парткод: | 302F924490 |
| Деталь: | ROLLER MIDDLE ASSY |
| Парткод: | 302GA24030 |
| Цена: | 500 ₽ |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | BUSH 8 |
| Парткод: | 302H024830 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | BUSH SCREW |
| Парткод: | 302H702590 |
| Деталь: | BUSH 6 EW |
| Парткод: | 302H024370 |
| Цена: | 190 ₽ |
| Деталь: | GEAR REG Z26H-Z33H |
| Парткод: | 302F924700 |
| Деталь: | BUSH TRANSFER R |
| Парткод: | 302F924190 |
| Цена: | 150 ₽ |
| Деталь: | BUSH TRANSFER L |
| Парткод: | 302F924830 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | ROLLER REGIST UP |
| Парткод: | 302F924020 |
| Деталь: | BUSH REGIST |
| Парткод: | 302F924160 |
| Деталь: | GEAR REGIST Z23H |
| Парткод: | 302F924430 |
| Деталь: | GEAR FEED ROLL Z27H |
| Парткод: | 302F931430 |
| Деталь: | SPRING REGIST R |
| Парткод: | 302F924460 |
| Деталь: | SPRING TC L |
| Парткод: | 302F924390 |
| Деталь: | SPRING TC R |
| Парткод: | 302F924400 |
| Цена: | 240 ₽ |
| Деталь: | GUIDE FEED UP |
| Парткод: | 302F906010 |
| Деталь: | GUIDE FEED L |
| Парткод: | 302F906190 |
| Деталь: | SENSOR OPT |
| Парткод: | 7NXTLP1255++H01 |
| Деталь: | GUIDE FEED R |
| Парткод: | 302F906200 |
| Деталь: | SHAFT FEED R |
| Парткод: | 302F906290 |
| Деталь: | BUSH SCREW |
| Парткод: | 302H702590 |
| Деталь: | SPRING PICK UP |
| Парткод: | 302F906120 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | FEED HOLDER ASSY |
| Парткод: | 302F994062 |
| Цена: | 6 300 ₽ |
| Деталь: | PARTS ISU ASSY(L) |
| Парткод: | 302MC93010 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | BUSHING FAN |
| Парткод: | 302JD19140 |
| Деталь: | PARTS MOTOR ISU SP |
| Парткод: | 302LW94060 |
| Деталь: | STOPPER ISU |
| Парткод: | 302H917330 |
| Деталь: | SPRING TENSION |
| Парткод: | 302H917270 |
| Деталь: | PARTS FRAME ISU TOP ASSY SP |
| Парткод: | 302LW94100 |
| Цена: | 7 500 ₽ |
| Деталь: | PULLEY TENSION |
| Парткод: | 302H917240 |
| Деталь: | BELT ISU |
| Парткод: | 302H917230 |
| Цена: | 1 000 ₽ |
| Деталь: | GEAR ISU 63/32 |
| Парткод: | 302H917220 |
| Деталь: | PARTS PWB MAIN ASSY SP (3in1 model) |
| Парткод: | 302MC94121 |
| Деталь: | PARTS PWB MAIN ASSY SP EU (3in1 model) |
| Парткод: | 302MC94131 |
| Деталь: | PARTS PWB MAIN ASSY SP (4in1 model) |
| Парткод: | 302MD94021 |
| Деталь: | PARTS PWB MAIN ASSY SP EU (4in1 model) |
| Парткод: | 302MD94031 |
| Деталь: | PARTS FAX UNIT E SP (4in1 model) |
| Парткод: | 302KX94041 |
| Деталь: | PARTS FAX UNIT U SP (4in1 model) |
| Парткод: | 302KX94051 |
| Деталь: | FAN R 80 |
| Парткод: | 302J044040 |
| Деталь: | SOLENOID DLP |
| Парткод: | 302F944071 |
| Деталь: | GEAR DLP Z31H |
| Парткод: | 302F931190 |
| Деталь: | PARTS MOTOR LIFT ASSY SP |
| Парткод: | 302F994320 |
| Деталь: | PULLEY RAIL DOUBLE |
| Парткод: | 302F925480 |
| Деталь: | SPRING SHUTTER ARM |
| Парткод: | 302F912360 |
| Деталь: | LK-350 |
| Парткод: | 302J193040 |
| Деталь: | GEAR SHUTTER Z16S |
| Парткод: | 302F912340 |
| Деталь: | GEAR SHUTTER Z18S |
| Парткод: | 302F912330 |
| Деталь: | CLUTCH DLP |
| Парткод: | 302F931600 |
| Деталь: | COVER DRUM SHUTTER |
| Парткод: | 302F912310 |
| Деталь: | SPRING SHUTTER L |
| Парткод: | 302F912370 |
| Деталь: | SPRING RAIL SW |
| Парткод: | 302F925872 |
| Деталь: | SW.PUSH |
| Парткод: | 7SP01000001 + H01 |
| Деталь: | FAN MOTOR |
| Парткод: | 302J044071 |
| Деталь: | GEAR Z26Z15 |
| Парткод: | 302F909550 |
| Деталь: | GEAR Z50Z16 |
| Парткод: | 302F909530 |
| Деталь: | GEAR Z49 |
| Парткод: | 302F909540 |
| Деталь: | GEAR Z40HZ18 |
| Парткод: | 302F909510 |
| Деталь: | GEAR Z60Z16 |
| Парткод: | 302F909520 |
Коды ошибок
0030
0070
0100
0120
0130
0140
0150
0170
0180
0420
0830
0840
0870
0920
1010
2000
2200
3100
3200
3300
3500
4000
4200
4700
5100
6000
6020
6030
6220
6230
6400
7000
7410
9500
9510
9520
F000
F020
F040
F041
F050
Описание
| Error code: | 0030 |
| Description: | FAX control PWB system error Processing with the fax software was disabled due to a software problem. |
| Causes: | Defective FAX control PWB. |
| Remedy: | FAX control PWB 1. Turn the main power swtch off and after 5 seconds, re-mount the FAX controller PWB, then turn power on. 2. Reinstall the fax software. 3. Replace the FAX control PWB. |
| Error code: | 0070 |
| Description: | FAX control PWB incompatible detection error Abnormal detection of FAX control PWB incompatibility In the initial communication with the FAX control PWB, any normal communication command is not transmitted. |
| Causes: | Defective FAX software. Defective FAX control PWB. |
| Remedy: | FAX control PWB (The FAX PWB installed will not be the one designed for the machine.) 1. Install the FAX system designed for the model. 2. Reinstall the fax software. |
| Error code: | 0100 |
| Display: | MAINTENANCE CALL 0100 |
| Description: | Backup memory device error |
| Causes: | Defective flash memory. Defective main PWB. |
| Remedy: | EEPROM (main PWB) 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Check that the EEPROM on the main circuit PWB is peroperly installed on the main circuit PWB and, if not, re-install it. 3. Replace the main PWB |
| Error code: | 0120 |
| Description: | There is a problem with Thermistor for Pre-Heater. |
| Causes: | Thermistor Cable has short circuited or cutline. Thermistor has a problem. |
| Remedy: | Check Cable connection around Thermistor Thermistor replacement |
| Error code: | 0130 |
| Description: | There is a problem with Thermistor for Print Heater. |
| Causes: | Thermistor cable has short circuited or cutline. Thermistor has a problem. |
| Remedy: | Check Cable connection around Thermistor Thermistor replacement |
| Error code: | 0140 |
| Description: | There is a problem with Thermistor for dryer. |
| Causes: | Thermistor cable has short circuited or cutline. Thermistor has a problem. |
| Remedy: | Check Cable connection around Thermistor Thermistor replacement |
| Error code: | 0150 |
| Description: | Even though the machine carries out the regular movement, the output of Slider Sensor does not reach the expected value. |
| Causes: | Slider Motor has a problem. Slider Sensor has a problem. Wiring or Flexible Cable has short circuitted or cut-line. Servo Board has a problem. |
| Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Slider Motor replacement Slider Sensor replacement Wiring or Flexible Cable replacement Servo Board replacement |
| Error code: | 0170 |
| Description: | Even though the machine carries out the regular movement, the output of Supply Pump 1 Sensor does not reach the expected value. |
| Causes: | Supply Pump 1 Motor has a problem. Supply Pump 1 Sensor has a problem. Supply Pump 1 Magnet has dropped out. Wiring or Flexible Cable has short circuitted or cut-line. Pump Drive Board has a problem. Servo Board has a problem. |
| Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Check Supply Pump 1 Magnet Supply Pump 1 Motor replacement Supply Pump 1 Sensor replacement Wiring or Flexible Cable replacement Pump Drive Board replacement Servo Board replacement |
| Error code: | 0180 |
| Description: | Even though the machine carries out the regular movement, the output of Maintenance Liquid Pump Sensor does not reach the expected value. |
| Causes: | Maintenance Liquid Pump Motor has a problem. Maintenance Liquid Pump Sensor has a problem. Maintenance Liquid Pump Magnet has dropped out. Wiring or Flexible Cable has short circuitted |
| Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Maintenance Liquid Pump Motor replacement Maintenance Liquid Pump Sensor replacement Wiring or Flexible Cable replacement Servo Board replacement |
| Error code: | 0420 |
| Description: | Paper feeder communication error Communication error between control PWB and optional paper feeder. |
| Causes: | Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main-PWB. |
| Remedy: | Improper installation paper feeder. Follow installation instruction carefully again. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Defective control PWB. Replace the control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Defective PF main- PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 0830 |
| Description: | FAX control PWB flash program area checksum error A checksum error occurred with the program of the FAX control PWB |
| Causes: | Defective FAX software. Defective FAX control PWB. |
| Remedy: | FAX software 1. Reinstall the fax software. FAX control PWB 1. Execute initializing by U600.(Refer to the FAX service manual) 2. Replace the FAX control PWB. |
| Error code: | 0840 |
| Description: | Faults of RTC (“Time for maintenance T” is displayed) [Check at power up] The RTC setting has reverted to a previous state. The machine has not been powered for 5 years (compared to the settings stored periodically in the EEPROM). The RTC setting is older than 00:01 on January 1, 2000. [Checked periodically (in 5- minute interval) after powered up] The RTC setting has reverted to a state older than the last time it was checked. 10 minutes have been passed since the previous check. After C840 is detected, the machine enters in disconnection mode after the main power switch has been switched on and off and indicates ‘Maintenance T.’ |
| Causes: | The battery is disconnected from the main PWB Defective main PWB. |
| Remedy: | Battery (main PWB) 1. Make sure that the back-up batteries on the main PWB are not short-circuited. 2. Reset Maintenance T by executing U906. 3. If the same C call is displayed when power is switched on and off, replace the back up battery. 4. If communication error (due to a noise, etc.) is present with the RTC on the main circuit PWB, check the PWB is properly grounded. Main PWB Replace the main PWB |
| Error code: | 0870 |
| Description: | PCFAX control PWB to main PWB high capacity data transfer error High-capacity data transfer between the FAX control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified times. |
| Causes: | Improper installation FAX control PWB. Defective FAX control PWB or main PWB. |
| Remedy: | FAX control PWB 1. Turn the main power swtch off and after 5 seconds, re-mount the FAX controller PWB, then turn power on. 2. Replace the FAX control PWB. HDD Execute U024 to initialize the HDD. Main PWB Replace the main PWB. |
| Error code: | 0920 |
| Description: | Fax file system error The backup data is not retained for file system abnormality of flash memory of the FAX control PWB. |
| Causes: | Defective FAX control PWB. |
| Remedy: | FAX control PWB 1. Execute initializing by U600 (Refer to the FAX service manual). 2. Replace the FAX control PWB. |
| Error code: | 1010 |
| Display: | Problem with Printhead L/R Chk printing results |
| Description: | Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s. This error is detected 4 times successively. |
| Causes: | Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective lift motor 1. Defective engine PWB. |
| Remedy: | Cassette lift base elevating mechanism Check that the cassette base can be manipulated smoothly, if not, repair or replace. Lift motor 1 1. Check that the cassette base has been ascended. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift motor 1 and Feed PWB 2 (YC3) Feed PWB 2 (YC1) and Engine PWB (YC4) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the lift motor 1. Lift sensor 1 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift sensor 1 and Feed PWB 2 (YC8) Feed PWB 2 (YC1) and Engine PWB (YC4) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the lift sensor1. Feed PWB 2 Replace the Feed PWB 2. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 2000 |
| Description: | DDA Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 2200 |
| Description: | Main motor steady-state error After main motor is stabilized, the ready signal is at the H level for 2 s continuously. |
| Causes: | Main motor. Engine PWB. |
| Remedy: | Main motor 1. To check the motor operation execute U030 Main (main motor). 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Main motor and Engine PWB (YC16) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the main motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 3100 |
| Description: | Scanner carriage error The home position is not correct when the power is turned on, at the end of a reading process of the table and document processor. |
| Causes: | Defective connector cable or poor contact in the connector. Defective home position sensor. Defective scanner motor. Defective ISC PWB. Defective main PWB. |
| Remedy: | The scanner mirror frame is being locked after setup. Check whether the scanner mirror frame has been unlocked and unlock if necessary. Scanner motor 1. To check the scanner motor, execute U073. 2. Move the scanner by the hand to check whether it is unusually difficult to move. 3. Check that the optical wire rope is not disengaged and engage the wire. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Scanner motor and ISC PWB (YC5) ISC PWB (YC3) and Main PWB (YC11) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the scanner motor. Home position sensor 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Home position sensor and ISC PWB (YC8) 3. Replace the home position sensor. ISC PWB Replace the ISC PWB and execute U411. Main PWB Replace the main PWB. |
| Error code: | 3200 |
| Description: | Exposure lamp error When input value at the time of LED lamp PWB illumination does not exceed the threshold value between 5 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective LED lamp PWB. Defective ISC PWB. Defective main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. LED lamp PWB and ISC PWB (YC6) CCD PWB (YC2) and ISC PWB (YC9) ISC PWB (YC3) and main PWB (YC11) Defective LED lamp PWB. Replace the LED lamp PWB and check for correct operation. Defective ISC PWB. Replace the ISC PWB and check for correct operation. Defective CCD PWB. Replace the ISU and check for correct operation. Defective main PWB. Replace the main PWB and check for correct operation. |
| Error code: | 3300 |
| Description: | Optical system (AGC) error One of the gains is FF or 00 during the CCD lamp AGC is being processed. |
| Causes: | Defective connector cable or poor contact in the connector. Defective exposure lamp Defective CCD PWB. Defective ISC PWB. Defective main PWB. |
| Remedy: | LED lamp PWB 1. To check the lamp, execute U061 CCD. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. LED lamp PWB and ISC PWB (YC6) CCD PWB (YC2) and ISC PWB (YC9) ISC PWB (YC3) and Main PWB (YC11) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. If the LED lamp won’t light, replace the LED PWB and execut U411. CCD PWB Replace the ISU and execute U411. ISC PWB Replace the ISC PWB and execute U411. Main PWB Replace the main PWB. |
| Error code: | 3500 |
| Description: | Communication error between scanner and ASIC An error code is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Defective ISC PWB. Defective main PWB. |
| Remedy: | ISC PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. ISC PWB (YC3) and Main PWB (YC11) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the ISC PWB and execute U411. Main PWB Replace the main PWB. |
| Error code: | 4000 |
| Display: | Supplies Drum End Soon. |
| Description: | Command Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 4200 |
| Display: | Supplies Replace Drum |
| Description: | BD steady-state error The BD signal is not detected. |
| Causes: | APC PWB (LSU). Main/Engine PWB. |
| Remedy: | APC PWB (LSU) 1. Confirm that the FCC wiring connector is not distorted and connect the FCC wiring all the way in. Laser scanner unit and main/engine PWB (YC2010) 2. If the FCC wiring is disconnected, shorted or grounded, replace the FCC wiring. 3. Replace the laser scanner unit. Main/Engine PWB 1. Check the main/engine software and upgrade to the latest, if necessary. 2. Replace the main/engine PWB. |
| Error code: | 4700 |
| Display: | Supplies WT Box End Soon |
| Description: | VIDEO_ASIC device error Communication with the video ASIC has failed 5 times successively. After writing to the VIDEO ASIC, the error that the reading value from the same address does not match occurs 8 times successively. |
| Causes: | Engine PWB. Main PWB |
| Remedy: | Main PWB 1. Unplug the power cord from the wall outlet, and wait five seconds. Then plug in the power cord and then turn on the power switch. 2. Check that the connectors on the main PWB are properly connected, and if not, re-connect them. 3. Replace the main PWB. |
| Error code: | 5100 |
| Description: | Short-circuited main charger output Five pages have been printed with the main charger output short-circuited. |
| Causes: | Drum unit installed incorrectly. Engine PWB installed incorrectly. Defective engine PWB |
| Remedy: | Drum unit installed incorrectly. Verify harness is not pinched in the drum unit. Engine PWB installed incorrectly. Verify harness is not pinched in the engine PWB. Defective engine PWB. Replace the engine PWB. |
| Error code: | 6000 |
| Description: | Broken fuser heater wire Fuser thermistor 1 does not reach 100° C/212 °F even after 30 s during warming up. The detected temperature of fuser thermistor 1 does not reach the specified temperature (ready indication temperature) for 420 s in warming up after reached to 100° C/212 °F. |
| Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
| Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Power source PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Power source PWB (YC3) and fuser heater PWB (YC3) Fuser heater PWB (YC2) and feed PWB 1 (YC27) Feed PWB 1 (YC1) and Engine PWB (YC6) Fuser heater 1. Replace the fuser unit. |
| Error code: | 6020 |
| Description: | Abnormally high fuser thermistor 1 temperature Fuser thermistor 1 detects a temperature higher than 240°C/464°F for 1 s. |
| Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 1. Defective engine PWB. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 6030 |
| Description: | Broken fuser thermistor 1 wire Input from fuser center thermistor 1 is 1010 or more (A/D value) continuously for 1 s. Verify if A/D read in the differential output won’t change by 4 or more when it was turned on for 10 seconds in a lowtemperature environment. |
| Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 1 wire. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
| Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Fuser thermistor 1 1. Replace the Fuser unit. Fuser thermostat (triggered) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and fuser heater PWB (YC1) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. |
| Error code: | 6220 |
| Description: | Abnormally high fuser edge thermistor temperature Fuser thermistor 2 detects a temperature higher than 240°C/464°F for 1 s. |
| Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 2. Defective engine PWB. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 6230 |
| Description: | Broken fuser edge thermistor wire The Input signal from the fuser thermistor 2 is 992 or more (A/D value) continuously for 1 s when the temperature at the fuser thermistor 1 is higher than 100°C/212°F. Fuser thermistor 2 detects a lower then 50°C/122°F for 15s during warming up. |
| Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 2 wire. Fuser thermostat triggered. Defective fuser IH. Defective engine PWB. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 6400 |
| Display: | No Belt Unit Open the Front Cover, pull out all Drum Units completely and install the Belt Unit. |
| Description: | Zero-cross signal error While fuser heater ON/OFF control is performed, the zerocross signal is not input within 3 s. |
| Causes: | Fuser unit. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser heater PWB (YC2) and feed PWB 1 (YC27) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser heater PWB. |
| Error code: | 7000 |
| Display: | Jam Inside Open the Front Cover, pull out all four drum and toner cartridge assemblies and remove the jammed paper. |
| Description: | Toner motor problem The rated speed achievement signal won’t turn to L in 5 s since the motor is activated. The rated speed achievement signal turns to H every other 5 s after the machine is stabilized. |
| Causes: | Poor contact in the connector terminals. Broken the gear. Defective toner motor M/C/Y/BK. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC30 on the engine PWB and the connector on the toner motor, and the continuity across the connector terminals. Repair or replace if necessary. Broken the gear. Check visually and replace the gear if necessary. Defective toner motor M/C/Y/BK. Run maintenance item U135 and check if the toner motor operates. If not, replace the toner motor. Defective engine PWB. Replace the engine PWB and check for correct operation. |
| Error code: | 7410 |
| Description: | Drum unit connector insertion problem Absence of the drum unit is detected.c |
| Causes: | Drum unit connector inserted incorrectly. Defective drum unit connector. |
| Remedy: | Drum unit connector inserted incorrectly. Reinsert the drum unit connector if necessary. Defective drum unit connector. Replace the drum unit. |
| Error code: | 9500 |
| Description: | ISC PWB error A |
| Causes: | Main PWB. ISC PWB. |
| Remedy: | Main PWB ISC PWB 1. Reinsert the connector if its connection is loose. Main PWB (YC25) and ISC PWB (YC4) 2. Replace the main PWB. 3. Replace the ISC PWB 4. Contact the Service Support. |
| Error code: | 9510 |
| Description: | ISC PWB error B |
| Causes: | Main PWB. DP SHD PWB. |
| Remedy: | Main PWB DP SHD PWB 1. Reinsert the connector if its connection is loose. DP relay PWB (YC2) and DP SHD PWB (YC3) 2. Replace the main PWB. 3. Replace the DP SHD PWB. 4. Contact the Service Support. |
| Error code: | 9520 |
| Description: | ISC PWB error C |
| Causes: | Main PWB. ISC PWB. |
| Remedy: | Main PWB ISC PWB 1. Reinsert the connector if its connection is loose. Main PWB (YC25) and ISC PWB (YC4) 2. Replace the main PWB. 3. Replace the ISC main PWB 4. Contact the Service Support. |
| Error code: | F000 |
| Description: | Communication error between the main unit and CPU |
| Causes: | The panel cannot be detected since the CPU communication between the main PWB and the operation panel main PWB is unavailable. |
| Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 3 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. 5 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. |
| Error code: | F020 |
| Description: | System memory error (RAM reading/writing error or CPU memory error) |
| Causes: | The error appears during the reading/writing check of the RAM for the CPU when the main unit starts up. |
| Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 3 Checking the main PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the main PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the main PWB. |
| Error code: | F040 |
| Description: | Option installation error |
| Causes: | The size of the attached main memory is 2 GB when the DSDF is installed. |
| Remedy: | Main memory Replace the main memory with a 4 GB one. DSDF • Remove the DSDF. • Replace the DSDF with an RADF. |
| Error code: | F041 |
| Description: | Over than available setting number tray detection error |
| Causes: | Over than available setting number tray is installed. |
| Remedy: | Remove the available setting number tray. |
| Error code: | F050 |
| Description: | Engine main program error |
| Causes: | The engine program cannot start up. |
| Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 2 Resetting the main power The print engine ROM checksum is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 3 Checking the EEPROM The EEPROM is not properly attached. Reattach the EEPROM. 4 Checking the engine PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the engine PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the engine PWB. |
